Tips to Promote Safe Rigging in the Entertainment Industry

 Safe rigging is an important criterion in the entertainment industry. The entertainment rigging is a risky procedure that looks easier than done. Safe rigging measures need to be followed by the entertainment industry. Here are some of the safe rigging tips that you need to know if you are need in the rigging industry.  

Check if there is any damaged cable or cables 

The first thing you need to do when rigging, is check for the cables. If there is any damaged cables be mindful of plugging it in the switch board. It does not take a lot of time to ensure everything that you are using is safe for use, but it takes longer to heal from any burn or electrical fault. Being cautious when you deal with electrical wires and maintaining preventive measures is the first and the foremost thing you need to follow when in the rigging industry. You need to assume that there can be a hazard and act accordingly. 

Inspect the rigging wires and essentials before finally using them 

So, after you have thoroughly checked the cables and plugged them in the switch board, its time to check the other essentials required in rigging. Make sure you use the right kinds of riggers. Most of the time, people use synthetic riggers. These riggers are strong, yet sensitive to being rubbed in a wrong

way. This can lead to accidents. Inspect before you start rigging and also do check after everything is over. If you ever see a scarf mark on the synthetic rigger, that is indication that you need to replace the rigger. Retire the synthetic rigger sling, if the core material of the rigger is visible. Sling inspections are fifty percent tactile and fifty percent visible.  

Do pre-operational activities 

An entertainment that requites performers to perform any aerial task also requires pre=operational activities. After the rigger is all set to help performers perform, ask the performers to do some activities before their final performance. It requires constant attention for the performers to perform aerial activities at height. Therefore, before the performer actually get into a great height, he or she needs to perform the activity once or twice before. Pre-operational inspection and activity will give confidence to the performers and will also prove that the rigging has been done perfectly. The performers won’t have to face any danger while performing.  

Perform a compatibility check 

Compatibility checks between the attachments of rigging and the respective capacities is vital. One can easily use a beam clamp as an alternative to rigging attachments. This allows someone to get easily tightened with the clamp. Beam clamps can serve as the best alternative to beam clamps. So, before you start with the performance, check if the riggers are compatible with their respective capacities. 

These are the four tips one who is in the entertainment rigging industry needs to follow. This will help them provide safety to the performers and make sure they are performing without having to face any life risks.